Base cards - ACSCANADA

Search
Go to content

Main menu:

Base cards

Products > Voice > Avaya IP Office > Avaya IP500 Control unit & Base Cards

IP Office 500 Base Cards


The IP500 control unit has 4 slots for the insertion of cards. These cards can be divided into two types; base cards and daughter cards. Base cards include a front panel and ports for cable connections. Daughter cards can be added to a base card in order to provide additional facilities (typically trunk connections).

The following base cards are available:

  •    Digital Station 8 Card (Maximum 3).

  •    Analog Phone 2 Card and Phone 8 Card (Maximum 4).

  •    VCM Card (Maximum 2).

  •    4-Port Expansion Card (Maximum 1).

  •    Legacy Card Carrier (Maximum 2).

  •    Combination Card with 4 Analog Trunks (Maximum 2, no daughter card, IP500 V2 only).

  •    Combination Card with 2 BRI Trunks (Maximum 2, no daughter card, IP500 V2 only).

Digital Station 8 Card

This card provides 12 RJ45 ports. The first 8 ports are DS ports for the connection of AVAYA digital phones other than IP phones. The card can be fitted with an IP Office 500 daughter trunk card, which then uses the additional 4 RJ45 ports for trunk connections.

This card accepts one IP 500 trunk daughter card of any type.
4400 Series phones (4406D, 4412D and 4424D) are not supported on this card, only on Digital Station expansion modules. Therefore a maximum of 240 4400 Series phones are supported in the system.

Analog Phone 2 Card

This card provides 2 analog extension ports (1-2) for the connection of analog phones. The card can be fitted with an IP Office 500 daughter trunk card, which then uses the last 4 RJ45 ports (9-12) for trunk connections.

This card accepts one IP 500 trunk daughter card of any type.

Analog Phone 8 Card

This card provides 8 analog extension ports for the connection of analog phones. The card can be fitted with an IP Office 500 daughter trunk card, which then uses the additional 4 RJ45 ports for trunk connections.

This card accepts one IP 500 trunk daughter card of any type.

Combination Card with 4 Analog Trunks

This card works in the IP500 V2 only and provides:

  • 4 Analog trunk ports.

  • 2 Analog extension ports for the connection of analog phones.

  • 6 Digital Station (DS) ports for the connection of Avaya digital phones.

  • 10 VCM channels to support IP telephones or voice networking.


It does not support
additional daughter card. It provides a single power-fail port (either port 7 or port 8). A maximum of two of these cards is allowed in the chassis.

Combination Card with 2 BRI Trunks

This card works in the IP500 V2 only and provides:

  • 2 BRI trunk ports (4 Channels).

  • 2 Analog extension ports for the connection of analog phones.

  • 6 Digital Station (DS) ports for the connection of Avaya digital phones.

  • 10 VCM channels to support IP telephones or voice networking.


It does not support additional daughter card. It provides a single power-fail port (either port 7 or port 8). A maximum of two of these cards is allowed in the chassis.

Avaya IP500 VCM 32 V2 Base Card

The Avaya IP500 VCM 32 Base Card provides voice compression channels for your Avaya IP500 system. Voice compression channels are required when using IP trunk or IP endpoint applications.  

  • Provides 32 voice compression channels - Used for VoIP calls

  • Provides 4 RJ45 ports - Can be fitted with an optional IP500 trunk interface card that uses these ports for trunk connections (IP500 Analog Trunk 4, IP500 Universal PRI 1, IP500 Universal PRI 2)

  • Maximum - 2 per IP500 control unit; 148 channel maximum using IP500 and or IP400 VCM cards

Avaya IP500 VCM 64 V2 Base Card

The Avaya IP500 VCM 64 Base Card provides voice compression channels for your Avaya IP500 system. Voice compression channels are required when using IP trunk or IP endpoint applications.

Provides 32 voice compression channels - Used for VoIP calls

Trunk Cards

IP Office 500 daughter trunk cards can be fitted to existing IP Office 500 base cards to provide support for trunk ports. The daughter card uses the ports provided on the base card for cable connection. The addition of a daughter trunk card is supported on IP Office 500 Digital Station, Analog Phone and VCM base cards.

4-Port Expansion Card

This card provides connectors for 4 additional expansion modules.
It is not possible to connect a daughter card to the 4-port expansion card.

 
Copyright 2015. All rights reserved.
Back to content | Back to main menu